|
|
Post by stellafella on Nov 22, 2015 20:30:18 GMT
The thread on this bit seams ok so it must be the bit on the carb. I shall find a nut that fits and jb weld or araldite it to the carbs.  Get it done properly mate, otherwise your storing up future troubles. |
|
|
|
Post by rusty on Nov 22, 2015 20:32:18 GMT
Not sure Sussex is close enough lol Was in Sussex last week looking at a Bandit, May even go back and swap it for the gsxr yet so you never know. If you need to balance your carbs desperately I could post the carb tune to you so long as I get it back? [/quote] They do desperately need doing but I probably won't get the time to do it before Christmas...would be cool if your heading over this way to lend a hand as I've never balanced carbs before lol |
|
|
|
Post by antiks on Nov 22, 2015 20:37:38 GMT
Not sure Sussex is close enough lol Was in Sussex last week looking at a Bandit, May even go back and swap it for the gsxr yet so you never know. If you need to balance your carbs desperately I could post the carb tune to you so long as I get it back? They do desperately need doing but I probably won't get the time to do it before Christmas...would be cool if your heading over this way to lend a hand as I've never balanced carbs before lol[/quote] Will let you know if I'm heading your way. |
|
|
|
Post by bluedog59 on Nov 22, 2015 20:43:07 GMT
Balancing my carbs is something that mine desperately need I've got a set of Morgan carb tunes and an auxiliary fuel tank and if anyone's close to Hampshire, UK I would be willing to pop round and give a hand with balancing their carbs. Also willing to lend a hand should anyone be local and needs help. Likewise, I've got the same kit in Leicestershire if anybody needs their's doing. I've got a few other bits of useful kit to if anybody needs help (lathe taps, dies,helicoil kit etc. Sorry but I'm not up for posting stuff (not you, don't trust the Post Office) but if you're local. |
|
|
|
Post by paddy on Nov 22, 2015 20:57:27 GMT
I've got a set of Morgan carb tunes and an auxiliary fuel tank and if anyone's close to Hampshire, UK I would be willing to pop round and give a hand with balancing their carbs. Also willing to lend a hand should anyone be local and needs help. Not sure Sussex is close enough lol No but Southampton is   |
|
|
|
Post by antiks on Nov 22, 2015 20:59:57 GMT
If you need a hand Paddy and your only down the road in Southampton I could pop round and balance your carbs but your need to keep the bike running and get it up to temp before they can be balanced.
|
|
|
|
Post by rusty on Nov 22, 2015 21:01:21 GMT
Not sure Sussex is close enough lol No but Southampton is Meh lol |
|
|
|
Post by gsexr on Nov 23, 2015 18:31:24 GMT
|
|
|
|
Post by paddy on Nov 23, 2015 18:44:04 GMT
there was a way of making your on carb balancer in practial sportsbike a couple of month,s ago  ??  Yea with a bit of board to stick lots of pipe too, some water or something etc. By the time id made I mean fooked it up I may aswell have bought a proper one |
|
|
|
Post by paddy on Nov 23, 2015 18:47:54 GMT
If you need a hand Paddy and your only down the road in Southampton I could pop round and balance your carbs but your need to keep the bike running and get it up to temp before they can be balanced. Top man, once i have the throttle idle screw sorted I will take you up on that offer thanks, if you have anything dirty (no not mags,dvd's or your underwear) I can dunk it in my ultrasonic cleaner whilst we balance them. What is your biscuit of choice? |
|
|
|
Post by antiks on Nov 23, 2015 18:58:36 GMT
If you need a hand Paddy and your only down the road in Southampton I could pop round and balance your carbs but your need to keep the bike running and get it up to temp before they can be balanced. Top man, once i have the throttle idle screw sorted I will take you up on that offer thanks, if you have anything dirty (no not mags,dvd's or your underwear) I can dunk it in my ultrasonic cleaner whilst we balance them. What is your biscuit of choice? Just give me a shout when your ready. Custard creams with a large mug of coffee. |
|
|
|
Post by paddy on Nov 23, 2015 19:03:17 GMT
I don't drink tea or coffee so if I make it and it taste like shit I apologise
|
|
|
|
Post by bluedog59 on Nov 23, 2015 20:19:23 GMT
If you tap it out to M6 you can use a bolt for the time being and balance your carbs.
|
|
|
|
Post by paddy on Nov 23, 2015 20:46:06 GMT
I used a screw driver to hold it steady earlier |
|
|
|
Post by paddy on Nov 24, 2015 20:49:46 GMT
This is going to be the longest 3 1/2 months ever
|
|
