|
|
Post by bluedog59 on Dec 21, 2015 22:12:46 GMT
I know it's your bike but please don't put a window in the other hole, Put another filler or a blanking plate or a breather, anything but a window !!
BTW, What are you doing regarding a breather ?
|
|
|
|
Post by 370steve on Dec 21, 2015 22:16:20 GMT
I know it's your bike but please don't put a window in the other hole, Put another filler or a blanking plate or a breather, anything but a window !! BTW, What are you doing regarding a breather ? i am going to fit a rollover valve into it, with a breather line.  |
|
|
|
Post by 370steve on Dec 23, 2015 12:17:24 GMT
I took the fuel filler round to my mates yesterday for a chat about some work to get done to it, we have agreed to 1) removing the webs between bolt holes 2) removing around 8mm from the bottom face to allow it to sit lower when it is fitted 3) make a blanking plate to fit instead of the window, so i can fit either 4) make a mild steel mounting plate to weld to the tank for the filler to bolt too 5) drill and tap a breather mounting point on the plate will post some pics as and when things are done  |
|
|
|
Post by paddy on Dec 23, 2015 13:21:37 GMT
So what would be the purpose of a window on the filler anyway?
|
|
|
|
Post by 370steve on Dec 23, 2015 13:42:59 GMT
So what would be the purpose of a window on the filler anyway? think it is supposed to be a bit like the windows on clutch and ignighter covers. was like that when i got it, but will see how it looks once fitted. |
|
|
|
Post by 370steve on Dec 26, 2015 12:34:00 GMT
got an idea of changing the seat a bit, to make it more pillion friendly, means making the hump longer so pillion has more to sit on. have done a very ruff picture hack to give an idea of what direction i might go, but thinking of making the rear around 1" lower than in the pic? this is how she is  this is the way i am thinking of going, thoughts? ideas?  |
|
|
|
Post by bigkenxx on Dec 26, 2015 12:40:09 GMT
I like the the cut out for the rider and a bigger seat , don't know if a colour on the rear will make it look like a single seat ?
|
|
|
|
Post by 370steve on Dec 26, 2015 12:47:34 GMT
was thinking of colour on it, but not sure of the design yet!
|
|
|
|
Post by paddy on Dec 26, 2015 14:35:41 GMT
White sides, black on the arse area. That way it should disappear in the present paint scheme and look more solo seat.??
|
|
|
|
Post by paddy on Dec 26, 2015 16:04:47 GMT
sorry, i dont have photoshop lol Attachments:
|
|
|
|
Post by 370steve on Dec 26, 2015 16:52:10 GMT
now what you mean, i was thinking more of it matching up to the bodywork at both ends, so top of the seat black and bottom/sides white, if you see what i mean!
|
|
|
|
Post by paddy on Dec 26, 2015 16:58:15 GMT
White along the whole side of the seat. I think if you go along that route then imo keep the wheels black, but with just the rear seat white then you should get away with white wheels. All black seat either colour wheels.
|
|
|
|
Post by 370steve on Dec 26, 2015 17:25:22 GMT
was thinking more of this   |
|
|
|
Post by bigkenxx on Dec 26, 2015 17:36:38 GMT
That's nice but id still have riders cut out all black
|
|
|
|
Post by bigkenxx on Dec 26, 2015 17:43:57 GMT
|
|
