|
|
Post by 370steve on Mar 22, 2016 14:52:29 GMT
Right, I have put things off for long enough now, cant keep ignoring the poor little thing, sat waiting for some loving of the spanner variety in the shadows of my beasts.
so i am going to make a start on the "beastett" tonight...........................................watch this space
|
|
|
|
Post by winger on Mar 22, 2016 15:10:53 GMT
Ooooh!
|
|
|
|
Post by paddy on Mar 22, 2016 15:19:24 GMT
I'm watching
|
|
|
|
Post by 370steve on Mar 22, 2016 17:03:09 GMT
this is what i have to work with  need to do enough to get it through its first MOT  plus some other bits and bobs  |
|
|
|
Post by bluedog59 on Mar 22, 2016 18:51:05 GMT
Is it an invisible, "stealth" bike ?
|
|
|
|
Post by bigkenxx on Mar 22, 2016 19:07:17 GMT
Ha ha
|
|
|
|
Post by Rgstu on Mar 22, 2016 19:10:34 GMT
 ? what bike is it ? |
|
|
|
Post by paddy on Mar 22, 2016 19:53:05 GMT
? what bike is it ? Open your eyes man!! its in the pic. |
|
|
|
Post by Rgstu on Mar 22, 2016 20:19:05 GMT
What pic. ? I know I'm half blind through building my right arm up over the yrs !!! |
|
|
|
Post by bluedog59 on Mar 22, 2016 20:23:47 GMT
What pic. ? I know I'm half blind through building my right arm up over the yrs !!! You must be going blind, click on the link. |
|
|
|
Post by 370steve on Mar 22, 2016 23:51:24 GMT
here ya go   |
|
|
|
Post by bigkenxx on Mar 23, 2016 5:31:59 GMT
My eyes.... they burn lol
|
|
|
|
Post by paddy on Mar 23, 2016 7:05:18 GMT
My eyes.... they burn lol But if it was turbo'd you'd have a boner  |
|
|
|
Post by 370steve on Mar 23, 2016 9:25:13 GMT
My eyes.... they burn lol But if it was turbo'd you'd have a boner |
|
|
|
Post by 370steve on Mar 23, 2016 10:09:00 GMT
set about it last night (gnarf gnarf) got the engine almost out, only snapped one of the four exhaust studs! but it shouldnt be a problem as it is sticking out from the head and will be easy to get a grip of. main job to the engine is the replacement of the foot peg hanger bracket, it bolts to the bottom crankcase of the engine, it also should have the side stand bracket welded to it. somewhere along the way in its history it has hit something with the side stand and removed it along with the bracket!!! i had thought that the bracket had taken one of the mounting bolts with it when it went, and must have pulled the threads out too, but on closer inspection the threads are un damaged, so i can just bolt the new bracket in place without the need to do a thread repair. bolt must have fallen out before the impact, result. I will remove the engine tonight, make an attempt on the stud and see where i can go from there.  |
|
plus some other bits and bobs 
? what bike is it ?
