|
|
Post by Rgstu on Feb 20, 2016 8:43:25 GMT
crank £60 gearbox £65 mint crankcases £60 clutch diaphragm type £60 3x ign pickup plates £20 mint rocker cover been powder coated £20 mint sprocket cover same £15 bandit 12 sump £15 mint oil drain tubes powdercoated front ones £10 also found a powerscreen alt and crank £30 for both a big box off 1127 clutch parts bearings etc £40 4 very good 1127 pistons n rings £25 4 efe liners with pistons very good and a tool made to push the liners in £40 theres gsxr oil pumps blah blah blah just ask I might have it |
|
|
|
Post by rusty on Feb 20, 2016 9:45:32 GMT
What colour are the rocker and sprocket covers?
|
|
|
|
Post by Rgstu on Feb 20, 2016 9:49:53 GMT
Been done black rusty satin black
|
|
|
|
Post by rusty on Feb 20, 2016 12:22:16 GMT
Would those bits for the slab 750 engine?
|
|
|
|
Post by Rgstu on Feb 20, 2016 15:49:16 GMT
The sproket cover would fit not sure about the rocker cover
|
|
|
|
Post by bluedog59 on Feb 20, 2016 18:41:40 GMT
I;ve got a B12 motor with the clutch and some bits missing, not sure what, I need to have a look.
I'll try and check tomorrow but can you PM me if I forget. ( in a rush at the mo). Any idea on postage (LE12) ?
Ta.
|
|
|
|
Post by Rgstu on Feb 23, 2016 13:45:19 GMT
Leeds  Let me know what bits you need i can the po to weigh them  |
|
|
|
Post by bluedog59 on Feb 23, 2016 19:48:12 GMT
I am missing a clutch and cover. There maybe a couple of other bits like side cases as well but I'll check tomorrow, not had chance yet as it's buried under the bench. LE12 is Leicestershire, Leeds is LS.  Hmmm, come to think of it, I bought the spare motor to rob the gearbox as the bearing behind the clutch went on mine and this one had a duff crank....... then I bought a crank so I may want the gearbox as well. Discount for bulk purchase ? |
|
|
|
Post by Rgstu on Feb 23, 2016 21:42:49 GMT
Ive no got a clutch cover but list what ye need i will see what i can do |
|
|
|
Post by bluedog59 on Feb 24, 2016 18:16:04 GMT
I managed to have a grub round under the bench and it looks like I need a complete clutch (everything from the input shaft bearing outwards) and a left hand crank end casing. The gearbox may be useful as well.
|
|
|
|
Post by Rgstu on Feb 27, 2016 8:28:22 GMT
Clutch should ok I've loads o clutch bits. Gearbox I have not got casing this motor had aftermarket casings which I stupidly sold  |
|
|
|
Post by bluedog59 on Feb 27, 2016 20:29:10 GMT
Cool. Could you do me a price for the clutch,gearbox and oil pipes please inc P+P ?
Ta.
|
|
Let me know what bits you need i can the po to weigh them 
