|
|
Post by jiterbug on Feb 17, 2016 17:44:10 GMT
Steve. Let me check the inlet size of the carbs. Are you selling those filters and hoses?
|
|
|
|
Post by 370steve on Feb 18, 2016 9:14:45 GMT
Are you selling those filters and hoses? If they will fit yours, then you can have them, just cost you postage.  |
|
|
|
Post by paddy on Feb 18, 2016 14:39:39 GMT
This GS has become a bit of a 'Triggers broom'.
|
|
|
|
Post by jiterbug on Feb 18, 2016 14:45:11 GMT
That is fantastic Steve. I'm checking my carbs for size this morning.
Paddy, what is a 'Triggers broom'?
|
|
|
|
Post by paddy on Feb 18, 2016 15:49:59 GMT
That is fantastic Steve. I'm checking my carbs for size this morning. Paddy, what is a 'Triggers broom'? I knew you would ask lol. I'll get a link for you. |
|
|
|
Post by paddy on Feb 18, 2016 15:52:16 GMT
It seems like only part of the frame now exists, not quite the same as triggers broom but its the best I've got
|
|
|
|
Post by 370steve on Feb 18, 2016 17:17:53 GMT
I was at a show a few years back, someone looked at my bike and then asked how old it was, told them it was 10, they then said "looks almost new"
I replied "it should do, all the parts are new!!"
|
|
|
|
Post by jiterbug on Feb 18, 2016 19:01:03 GMT
That's funny. Spot on though. It's not a GS anymore, that's for d@#$ sure.
|
|
|
|
Post by jiterbug on Feb 18, 2016 21:33:59 GMT
Steve. The flange on the carbs measure 2.05 inch. Or 52.07mm. That would be the inside diameter measurement of the silicon connectors.
|
|
|
|
Post by 370steve on Feb 19, 2016 9:46:01 GMT
Steve. The flange on the carbs measure 2.05 inch. Or 52.07mm. That would be the inside diameter measurement of the silicon connectors. I will get back to you with an answer soon as i get back from work  |
|
|
|
Post by jiterbug on Feb 19, 2016 13:30:09 GMT
Coolness.
|
|
|
|
Post by 370steve on Feb 22, 2016 9:54:05 GMT
Sorry i havent got back to you with info yet! will try to remember to do it tonight, honest  |
|
|
|
Post by jiterbug on Feb 22, 2016 11:13:12 GMT
No worries.
|
|
|
|
Post by 370steve on Feb 25, 2016 16:51:22 GMT
inlet rubber tubes are 52mm i/d, i have them fitted to 54mm carb inlets.
|
|
|
|
Post by jiterbug on Feb 25, 2016 23:12:45 GMT
They would work perfect Steve.
|
|
