|
|
Post by rusty on Jan 11, 2016 13:32:44 GMT
Thinking very seriously about ditching my vm29 flatslides and getting a set of bst36ss carbs
My question is what would i need to buy apart from the carbs themselves and what will i need to do in order to fit them?
Engine is a slabbie 750
Many thanks in advance
|
|
|
|
Post by paddy on Jan 11, 2016 14:26:16 GMT
The cv's from an 1100 teapot are a direct swap. May need to swap the main jet out but that's it.
|
|
|
|
Post by paddy on Jan 11, 2016 14:27:46 GMT
Some say you may need the machine rubbers for them 36's
|
|
|
|
Post by rusty on Jan 11, 2016 17:08:49 GMT
The cv's from an 1100 teapot are a direct swap. May need to swap the main jet out but that's it. You mean the powerscreen gsx? |
|
|
|
Post by rusty on Jan 11, 2016 17:09:29 GMT
Some say you may need the machine rubbers for them 36's Thats what i thought too  |
|
|
|
Post by paddy on Jan 11, 2016 17:47:18 GMT
Yea powerscreen and I meant matching not machine lol. But your mind naturally translated it anyway.
|
|
|
|
Post by rusty on Jan 11, 2016 18:06:59 GMT
Yea powerscreen and I meant matching not machine lol. But your mind naturally translated it anyway. Im used to dealing with people that cannot speak properly;-) |
|
|
|
Post by paddy on Jan 11, 2016 18:09:53 GMT
Yea powerscreen and I meant matching not machine lol. But your mind naturally translated it anyway. Im used to dealing with people that cannot speak properly;-) Yea, you get past Fareham and suddenly people become mockneys |
|
|
|
Post by bluedog59 on Jan 11, 2016 18:21:51 GMT
What's the problem with the VM's ?
|
|
|
|
Post by paddy on Jan 11, 2016 18:33:07 GMT
What's the problem with the VM's ? Bagsy first dibs |
|
|
|
Post by bluedog59 on Jan 11, 2016 18:45:22 GMT
What's the problem with the VM's ? Bagsy first dibs GIT !!!  |
|
|
|
Post by rusty on Jan 11, 2016 19:04:23 GMT
Just a real pain in the arse o set up right and with the mods ive got, bigger carbs would make life easier for me :-D
|
|
|
|
Post by bluedog59 on Jan 11, 2016 19:17:52 GMT
Bore them out to 33mm then.  |
|
|
|
Post by gsexr on Jan 11, 2016 19:26:17 GMT
i have used a teapot engine in a slabby [750] and have cv carb,s on them no trouble but it does have a flat spot on them so they need some dyno time. and the flatside carb,s are bringing top doller at the moment  |
|
|
|
Post by paddy on Jan 11, 2016 19:32:55 GMT
Best keeping hold of them and buy cv's aswell.
|
|
